Overview
Mobaro supports Bluetooth pairing to ensure seamless device functionality, such as connecting external scanners or IoT devices. Follow these steps to pair your Bluetooth device successfully.
Steps to Pair a Bluetooth Device
Access the Bluetooth Settings
Navigate to the settings menu on your Mobaro device.
Select "Bluetooth".
Note: Ensure Bluetooth is turned on for both the Mobaro device and the device you wish to pair.
Put Your Device in Pairing Mode
Activate pairing mode on the Bluetooth device you’re connecting.
Refer to the device’s user manual for specific instructions.
Tip: Most devices enter pairing mode automatically when first powered on. Look for blinking lights or audio prompts as an indication.
Scan for Available Devices
In the Mobaro Bluetooth Settings, tap "Scan".
Wait for your device to appear in the list of available Bluetooth devices.
Warning: Ensure no other device is actively trying to pair at the same time to avoid connection issues.
Select and Connect
Tap the name of your Bluetooth device from the list. Follow any on-screen prompts to confirm the connection.
Recommendation: If prompted for a passcode, use the default (often “0000” or “1234”) unless the device specifies otherwise.
Confirm Pairing
Once paired, the device should appear in the Paired Devices section. Test the functionality of the connected device to ensure it’s working as expected.
Note: A confirmation message will display on successful pairing. If the connection fails, restart both devices and repeat the steps above.
Frequently Asked Questions
Q: What if my Bluetooth device isn’t showing up?
A: Ensure the device is in pairing mode and within range. If issues persist, restart both devices and try again.
Q: Can I pair multiple Bluetooth devices with Mobaro?
A: Yes, Mobaro supports multiple device connections, but only one may be actively used at a time depending on the feature.
Q: What if the connection keeps dropping?
A: Check for interference from other devices or ensure the Bluetooth device is fully charged. Updating Mobaro’s software may also resolve connectivity issues.
Q: How do I unpair a device?
A: In the Paired Devices section, select the device and tap "Unpair" or "Forget Device".
Q: What devices are supported for temperature readings?
A: For temperature readings, we support the BT125KC and BT125W from Comark Instruments.